Know What to Look for in Roof Inspection and When to Hire a Roofing Pro

To help to save energy and prevent leaks here’s how to know when it’s time for a new roof and how to inspect your roof.

Literally open to exposure roof damage leaves you. If leaks cause mold and water damage you might face costly repairs. You can avoid trouble by checking for problems and maintaining your Oklahoma roofing.

Here’s how to determine what a job is for the professionals, what you should have someone else come look at, and what you can spot on your own.

Look for these during your roof inspection

With the help of binoculars and from the ground you must check for any of these issues safely.

Missing or lifting shingles: Shingles dropping and ice damming may be caused by poor insulation, or it could mean to the end of its life your roof is coming. It’s time to hire a professional.

• Destroyed drip edge: To protect the fascia under the roof eaves this metal flashing hangs. Rainwater can get in if it’s missing or damaged. It’s not a bad idea to have an OKC roofing professional come out to go over possible solutions and to diagnose the problem although fixing it can be a DIY project.
• 
  
• Flashing issues: Anywhere your roof meets a vertical surface, near the chimney and all the roof valleys must be checked. Including bent, missing or damaged flashing, anything out of the ordinary must be looked for. Bring in a professional as fixing it requires being on the roof.
• 
  
• Exposed or neglected fasteners: underlayment or shingles and siding in Oklahoma City could be loose if fasteners or nails are compromised, which means for water damage your roof might be ripe.

Hire the pros now

The following checks must be done by a qualified roofing professional. Helping with these areas OKC has technicians and diagnosticians.

• Deteriorated underlayment: under the shingles and over the sheathing and underlayment is usually a synthetic or felt material. Water can easily seep in if it’s damaged.

Destroyed sheathing: Sheathing is what your shingles are attached to usually made of oriented strand board (OSB) or plywood; the roof elements are kept stable by it.